Need help?Do you have a question about the Datalogic Touch 65 Pro and is the answer not in the manual?
General| Wavelength | 640 nm |
|---|---|
| Tilt angle range | -45 - 45 ° |
| Yaw reading angle | -70 - 70 ° |
| Decoding standards | 1D / Linear\\r GS1 |
| Maximum scan width | 65 mm |
| Pitch reading angle | -65 - 65 ° |
| Light levels (direct sunlight) | 0 - 20000 lx |
| Dimensions (WxDxH) | 84 x 58 x 160 mm |
| Input voltage | 5 V |
| Power consumption | 100 mA |
| Bluetooth | No |
| Standard interfaces | USB, RS-232, Keyboard wedge |
| Buzzer | Yes |
| Certification | RoHS |
| Product color | Black |
| International Protection (IP) code | IP30 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Weight | 130 g |
|---|
Overview of the Touch TD1100 series, its features, and available models.
Information on obtaining technical assistance from Datalogic or resellers.
Instructions for checking the reader and accessories upon delivery.
Steps to connect and establish communication between the reader and its host.
Procedures for selecting and configuring the reader's host interface.
Overview of reader configuration options via bar codes.
Setting to control whether the reader responds to host commands.
Configuration for USB suspend mode behavior and PC wake-up.
Default settings for the RS-232 interface, including baud rate, data bits, etc.
Default settings for RS-232/USB-COM interfaces, covering delays and acknowledgments.
Setting the keyboard country/language for compatibility.
Configuration for how the Caps Lock key state is transmitted.
Setting for the Numlock key state in Keyboard Wedge interface.
Specifies if numeric characters use standard keys or keypad.
To Next Page
