Datalogic Touch 65 Pro - Plessey Check Character Transmission; Plessey Length Control

Enter/Exit Programming Mode Plessey
244 Touch TD1100
Plessey Check Character Transmission
Enables/disables transmission of an MSI check character.
Plessey Length Control
This feature specifies either variable length decoding or fixed length decoding for the Plessey
symbology.
Variable Length. For variable length decoding, a minimum and maximum length may be set.
Fixed Length. For fixed length decoding, two different lengths may be set.
Plessey Check Character Transmission = Disable
Plessey Check Character Transmission = Enable
DEFAULT
Plessey Length Control = Variable Length
Plessey = Fixed Length
DEFAULT