Need help?Do you have a question about the Datalogic Touch TD1100 and is the answer not in the manual?
General| Scan Technology | Linear Imager |
|---|---|
| Interface | USB, RS-232, Keyboard Wedge |
| Environmental Sealing | IP42 |
| Connectivity | Wired |
| Operating Temperature | 0 to 50 °C / 32 to 122 °F |
| Drop Resistance | Withstands drops from 1.5 m / 5.0 ft onto concrete |
| Print Contrast Ratio | 15% |
| Decode Capability | All standard 1D codes including GS1 DataBar linear codes |
| Resolution | 4 mils |
| Humidity | 5 to 95% (Non-condensing) |
| Power Supply | Host power or external power supply |
| Voltage | 5 VDC +/- 5% |
| Storage Temperature | -20 to 70 °C / -4 to 158 °F |
Information on using the reader with a hands-free stand.
Guide on connecting and disconnecting the reader's cable.
Details on connecting the reader to various host interfaces.
Proper technique for touching and scanning barcodes.
Procedure to restore the reader to factory default settings.
Bar codes for configuring RS-232, USB, and Keyboard Wedge interfaces.
Specifications and requirements for the product's power supply.
FCC and Canadian requirements for radio frequency interference.
Guidelines for the disposal of Waste Electrical and Electronic Equipment.
Details warranty coverage, claims process, and exclusions.
Information on product support, manuals, and contact methods.
To Next Page