Datalogic Touch TD1100

Programming Bar Codes
Quick Reference Guide 5
Programming Bar Codes
For your convenience, this guide includes the programming bar codes required to configure
the reader for use with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete information about program-
ming and configurable features. You can download the latest version of the PRG and any
other available publications for the reader from the website listed on the back cover of this
manual.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the Factory Default Settings bar code
below. This will copy the factory configuration for the currently active interface to the cur-
rent configuration.
Factory Default Settings
Host Interfaces
Cables may vary depending on system configuration.
Some interfaces require the reader to start in the disabled state when
p
owered on. If additional reader configuration is desired while in this
state, pull the trigger and hold it for five seconds. The reader will
change to a state that allows programming with bar codes.
NOTE