Need help?Do you have a question about the Datalogic Touch 90 pro and is the answer not in the manual?
General| Scan speed | 256 sec/page |
|---|---|
| Decoding standards | 2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar |
| Standard interfaces | USB, RS-232 |
| Input voltage | 5 V |
| Power consumption | 150 mA |
| Dimensions (WxDxH) | 175 x 100 x 80 mm |
Weight and Dimensions| Weight | 195 g |
|---|
Overview of the Datalogic ADC Touch TD1100 series readers.
Information on obtaining technical assistance from Datalogic and resellers.
Steps to connect the reader and establish communication with its host.
Instructions for connecting the reader to the host via RS-232 or Keyboard Wedge.
Procedure to select the reader's interface type by scanning programming bar codes.
Instructions for reconfiguring the reader using programming bar codes and the ENTER/EXIT sequence.
Information on using the Aladdin Configuration application for device setup and software upgrades.
Instructions to restore custom or factory default configurations using specific bar codes.
Guide to changing reader parameters and logical groups for interface, global, and symbology-specific settings.
Enables or disables the reader's ability to read UPC-A bar codes.
Enables or disables the reader's ability to read EAN 13/JAN 13 bar codes.
Enables or disables the reader's ability to read EAN 8/JAN 8 bar codes.
Enables or disables the reader's ability to read GS1 DataBar Omnidirectional bar codes.
Enables or disables the reader's ability to read GS1 DataBar Expanded bar codes.
Enables or disables the reader's ability to read Code 39 bar codes.
Enables or disables the reader's ability to read Code 128 bar codes.
Enables or disables the reader's ability to read I 2 of 5 bar codes.
To Next Page
