Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode Parity
22 Touch TD1100
Parity
This feature specifies parity required for sending and receiving data. A parity check bit is the
most significant bit of each ASCII coded character. Select the parity type according to host
device requirements.
• Select None when no parity bit is required.
• Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an
odd number of 1 bits ar
e contained in the coded character.
• Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure that an
ev
en number of 1 bits are contained in the coded character.
$CR2PA00
Parity = None
$CR2PA01

Parity = Even
$CR2PA02

Parity = Odd
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g