Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode GS1 DataBar
TM
Omnidirectional
122 Touch TD1100
GS1 DataBar
TM
Omnidirectional
The following options apply to the GS1 DataBar Omnidirectional (formerly RSS-14)
symbology.
GS1 DataBar Omnidirectional Enable/Disable
When disabled, the reader will not read GS1 DataBar Omnidirectional bar codes.
GS1 DataBar Omnidirectional GS1-128 Emulation
When enabled, GS1 DataBar Omnidirectional bar codes will be translated to the GS1-128 label
data format.
$C4BEN00
GS1 DataBar Omnidirectional = Disable
$C4BEN01

GS1 DataBar Omnidirectional = Enable
DEFAULT
$C4BU800
GS1 DataBar Omnidirectional GS1-128 Emulation =
Disable
$C4BU801

GS1 DataBar Omnidirectional GS1-128 Emulation =
Enable
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g