Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode BC412
238 Touch TD1100
BC412 Check Character Calculation
Enable this option to enable/disable calculation and verification of an optional BC412 check
character. When disabled, any check character in the label is treated as a data character.
BC412 Minimum Reads
This feature specifies the minimum number of consecutive times a BC412 label must be
decoded before it is accepted as good read.
$CBCCC00
BC412 Check Character Calculation = Don’t Calculate
$CBCCC01

BC412 Check Character Calculation = Calculate Check
Character
DEFAULT
$CBCMR01
BC412 Minimum Reads = 1
$CBCMR02

BC412 Minimum Reads = 2
$CBCMR03

BC412 Minimum Reads = 3
$CBCMR04

BC412 Minimum Reads = 4
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g