Datalogic Touch 90 pro

Enter/Exit Programming Mode
52 Touch TD1100
Label Symbology Conversion
When this feature is enabled for the Wand Emulation interface, all barcode labels are converted
to a single symbology.
Options are:
• No conversion
• Convert to Code 39 symbology
• Convert to Code 39 Full ASCII
• Convert to Code 128 symbology
Label Symbology Conversion = No conversion
Label Symbology Conversion = Convert to Code 39
Label Symbology Conversion =
Convert to Code 39 Full ASCII
Label Symbology Conversion = Convert to Code 128
DEFAULT