Label ID Enter/Exit Programming Mode
Product Reference Guide
57
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given
symbology type.
NOTE
This setting requires the scanning of bar codes from multiple sec-
tions. See
"Label ID: Set Individually Per Symbology"
on
page 268 for more detailed programming instructions.
$CIDCO00
Label ID Transmission = Disable
$CIDCO01
Label ID Transmission = Enable as Prefix
$CIDCO02
Label ID Transmission = Enable as Suffix
~
CANCEL
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
To Next Page
Loading...
