Datalogic Touch 90 pro User Manual

LED and Beeper Indicators Enter/Exit Programming Mode
Product Reference Guide 75
Good Read Beep Type
Specifies whether the good read beep has a mono or bitonal beep sound.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable
from the list below. (Controls the beeper’s pitch/tone.)
$CBPTY00
Good Read Beep Type = Mono
$CBPTY01

Good Read Beep Type = Bitonal
DEFAULT
$CBPFR00
Good Read Beep Frequency = Low
$CBPFR01

Good Read Beep Frequency = Medium
$CBPFR02

Good Read Beep Frequency = High
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g