Datalogic Touch 90 pro

Code 5 Enter/Exit Programming Mode
Product Reference Guide 233
Code 4 Hex to Decimal Conversion
This feature enables/disables the conversion of hexadecimal label data to decimal label data.
Code 5
The following options apply to the Code 5 symbology.
Code 5 Enable/Disable
Enables/Disables ability of reader to decode Code 5 labels.
$CCRHD00
Code 4 Hex to Decimal Conversion = Disable
$CCRHD01

Code 4 Hex to Decimal Conversion = Enable
DEFAULT
$CC5EN00
Code 5 = Disable
$CC5EN01

Code 5 = Enable
DEFAULT