Datalogic Touch 90 pro User Manual

Product Reference Guide 67
READING PARAMETERS
DOUBLE READ TIMEOUT on page 68 GOOD READ BEEP VOLUME on page 76
LABEL GONE TIMEOUT on page 70 GOOD READ LED DURATION on page 79
POWER SAVE MODE on page 71 SCAN MODE on page 80
LED AND BEEPER INDICATORS on page 73 STAND MODE TRIGGERED TIMEOUT on page 81
POWER ON ALERT on page 73 SCANNING ACTIVE TIME on page 83
GOOD READ: WHEN TO INDICATE on page 74 STAND MODE FLASH on page 83
GOOD READ BEEP TYPE on page 75 FLASH ON TIME on page 84
GOOD READ BEEP FREQUENCY on page 75 FLASH OFF TIME on page 84
GOOD READ BEEP LENGTH on page 77 STAND MODE SENSITIVITY on page 85

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g