Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode GS1 DataBar
TM
Limited
128 Touch TD1100
GS1 DataBar
TM
Limited
The following options apply to the GS1 DataBar Limited (formerly RSS Limited) symbology.
GS1 DataBar Limited Enable/Disable
When disabled, the reader will not read GS1 DataBar Limited bar codes.
GS1 DataBar Limited GS1-128 Emulation
When enabled, GS1 DataBar Limited bar codes will be translated to the GS1-128 label data
format.
$CLBEN00
GS1 DataBar Limited = Disable
$CLBEN01

GS1 DataBar Limited = Enable
DEFAULT
$CLBU800
GS1 DataBar Limited GS1-128 Emulation = Disable
$CLBU801

GS1 DataBar Limited GS1-128 Emulation = Enable
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g