Datalogic Touch 90 pro

EAN Two Label Enter/Exit Programming Mode
Product Reference Guide 105
EAN Two Label
EAN Two Label Enable/Disable
When disabled, the reader will not read EAN two label bar codes.
EAN Two Label Combined Transmission
This feature enables/disables transmission of an EAN two label pair as one label. The label type
for EAN two label pairs is EAN 13.
$CN2EN00
EAN Two Label = Disable
$CN2EN01

EAN Two Label = Enable
DEFAULT
$CN2CT00
EAN Two Label = Disable
$CN2CT01

EAN Two Label = Enable
DEFAULT