Datalogic Touch 90 pro

Scanning Features Enter/Exit Programming Mode
Product Reference Guide 81
Stand Mode Triggered Timeout
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Stand Mode Triggered Timeout = 4 Seconds
This feature specifies the time to remain in Tr i g g e r S i n gl e mode after the trigger is pulled while
in Stand Mode.
NOTE
This timeout is only used when the Scan Mode is configured as Stand
Mode
.
$CSNOT01
$CSNOT03
$CSNOT04
$CSNOT06
$CSNOT08
DEFAULT