Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode Disable All Symbologies
88 Touch TD1100
Disable All Symbologies
Scan this label to disable all symbologies.
Coupon Control
This feature is used to control the method of processing coupon labels.
Options are:
• Allow all — allow all coupon bar codes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the
Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this and t
he facing page to ensure that the reader sees only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the Enter/Ex
it bar code.
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
Coupon Control = Enable only GS1 DataBar
$AD

Disable all symbologies
$CCPCL00
$CCPCL01
$CCPCL02
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g