Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode Standard 2 of 5
200 Touch TD1100
Standard 2 of 5 Decoding Level
Standard 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding for the Standard 2
of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
NOTE
The Standard 2 of 5 Decoding Level feature is set using "I 2 of 5
Decoding Level"
on page 160.
$CS2LC00
Standard 2 of 5 Length Control = Variable Length
$CS2LC01

Standard 2 of 5 Length Control = Fixed Length
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g