Enter/Exit Programming Mode Label ID
56
Touch TD1100
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a bar code (symbology) type. It can be appended previous to or
following the transmitted bar code data depending upon how this option is enabled. This
feature provides options for configuring custom Label IDs as a pre-loaded set (see "Label ID:
Pre-loaded Sets" on page 56) or individually per symbology (see "Label ID: Set Individually Per
Symbology" on page 57). If you wish to program the reader to always include an industry
standard label identifier for ALL symbology types, see the previous feature "Global AIM ID" on
page 55.
Label ID: Pre-loaded Sets
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
The reader supports two pre-loaded sets of Label IDs. shows the USA set and the EU set. See
"Label ID: Pre-loaded Sets" on page 266 for more information concerning the pre-loaded sets
that are provided.
CAUTION
When changing from one Label ID set to another, all other reader configu-
ration settings, including the host interface type, will be erased and set to
the factory defaults. Any custom configuration or custom defaults will be
lost.
$AE
$Ae
DEFAULT
To Next Page
Loading...
