Datalogic Touch 90 pro User Manual

Enter/Exit Programming Mode Codabar
174 Touch TD1100
Codabar
The following options apply to the Codabar symbology.
Codabar Enable/Disable
When disabled, the reader will not read Codabar bar codes.
Codabar Check Character Calculation
Enable this option to enables/disables calculation and verification of an optional Codabar check
character. When disabled, any check characters in the label are treated as data characters.
$CCBEN00
Codabar = Disable
$CCBEN01

Codabar = Enable
DEFAULT
$CCBCC00
Codabar Check Character Calculation = Don’t Calculate
$CCBCC01

Codabar Check Character Calculation = Enable AIM stan-
dard check char.
$CCBCC02

Codabar Check Character Calculation = Enable Modulo
10 check char.
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g