Datalogic Touch 90 pro User Manual

Codablock F Enter/Exit Programming Mode
Product Reference Guide 229
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
$CCFAC00
Codablock F AIM Check = Not AIM compliant
$CCFAC01

Codablock F AIM Check = AIM compliant
DEFAULT
$CCFLC00
Codablock F Length Control = Variable Length
$CCFLC01

Codablock F = Fixed Length
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g