Datalogic Touch 90 pro

Enter/Exit Programming Mode UPC-E
92 Touch TD1100
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar code data.
$CEBEN00
UPC-E = Disable
$CEBEN01

UPC-E = Enable
DEFAULT
$CEBCT00
UPC-E Check Character Transmission = Don’t Send
$CEBCT01

UPC-E Check Character Transmission = Send
DEFAULT