Datalogic Touch 90 pro User Manual

Country Mode Enter/Exit Programming Mode
Product Reference Guide 35
KEYBOARD INTERFACE
Use the programming bar codes in this chapter to select options for USB Keyboard and Wedge
Interfaces. Reference Appendix B, Standard Defaults for a listing of standard factory settings.
Information about control character emulation which applies to keyboard interfaces is listed in
Appendix E, Scancode Tables.
Country Mode
This feature specifies the country/language supported by the keyboard.
Only the following interfaces support ALL Country Modes.
• USB Keyboard (without alternate key encoding)
• Keyboard Wedge
All other interfaces support ONLY the following Country Modes:
U.S., B
elgium, Britain,
France, Germany, Italy, Spain, Sweden.
$CKBCO00
Country Mode = U.S.
$CKBCO01

Country Mode = Belgium
$CKBCO02

Country Mode = Britain
$CKBCO11

Country Mode = Croatia
Supports only the interfaces listed in the Country Mode
feature description.
Supports only the interfaces listed in the Country Mode fea-
ture description.
$CKBCO0E
Country Mode = Czech Republic
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g