Datalogic Touch 90 pro User Manual

UPC/EAN Global Settings Enter/Exit Programming Mode
Product Reference Guide 107
UPC/EAN Global Settings
This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8
symbologies, and affects all of these unless otherwise marked for each feature description.
UPC/EAN Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very aggressive to
very conservative depending on a particular customer’s needs. See "Decoding Levels" on
page 278 for more detailed programming instructions.
$CUNDL01
UPC/EAN Decoding Level = 1
$CUNDL02

UPC/EAN Decoding Level = 2
$CUNDL03

UPC/EAN Decoding Level = 3
$CUNDL04

UPC/EAN Decoding Level = 4
$CUNDL05

UPC/EAN Decoding Level = 5
DEFAULT

Datalogic Touch 90 pro Specifications

General

Scan speed	256 sec/page
Decoding standards	2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	150 mA
Dimensions (WxDxH)	175 x 100 x 80 mm

Weight and Dimensions

Weight	195 g