Datalogic Touch 65 Pro - Standard 2 of 5 Decoding Level; Standard 2 of 5 Length Control

Enter/Exit Programming Mode Standard 2 of 5
200 Touch TD1100
Standard 2 of 5 Decoding Level
Standard 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding for the Standard 2
of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
NOTE
The Standard 2 of 5 Decoding Level feature is set using "I 2 of 5
Decoding Level"
on page 160.
$CS2LC00
Standard 2 of 5 Length Control = Variable Length
$CS2LC01

Standard 2 of 5 Length Control = Fixed Length
DEFAULT