Enter/Exit Programming Mode
Product Reference Guide
49
WAND EMULATION INTERFACE
This chapter provides feature/settings configuration for the Wand Emulation interface.
Reference Appendix B, Standard Defaults for a listing of standard factory settings.
Wand Signal Speed
This feature specifies the speed of the Wand output signal per nominal bar or space. Choices
are:
• 330 microseconds
• 660 microseconds
Wand Signal Speed = 330ms
Wand Signal Speed = 660ms
WAND SIGNAL SPEED on page 49
WAND POLARITY on page 50
WAND IDLE STATE on page 50
TRANSMIT NOISE on page 51
LABEL SYMBOLOGY CONVERSION on page 52
To Next Page
Loading...
