48 A-Class
System Settings (continued)
Menu Item Details
APPLICATION VERSION
Displays the firmware program number, version, and
date.
BOOT LOADER
Displays the boot loader version and date.
UPGRADE PRINTER CODE
0 0 0 0 0 0
Upgrades the printer to the corresponding features
level with the correct code entry (where authorization
may be required).
UNLOCK FEATURE
0 0 0 0 0 0
Unlocks a feature with the correct code entry.
SET FACTORY DEFAULTS
Returns the factory-programmed values or the Factory
Setting File values, where:
YES
Restores the default settings, or if selected the Factory
Setting File.
;
A reset will occur and, if no Factory Setting File is
used, all settings returned except CUSTOM
ADJUSTMENTS and calibrations.
NO
Exits the menu item without changing the current
settings.
FORMAT ATTRIBUTES
Defines the way overlapping text, bar codes, and
graphics are printed, where:
TRANSPARENT
Prints intersecting areas, for
example:
XOR
Obliterates intersecting areas, for
example:
OPAQUE
Overwrites intersecting areas with
those last formatted, for example:
BUZZER
A signaling device that sounds Control Panel
keystrokes and, where:
ENABLED
Signals to indicate warning and fault conditions.
DISABLED
Does not signal to indicate warning and fault
conditions.
Allows the dot zero orientation to flip, as viewed from
the label exit, where:
Switching this setting will reverse all media
movement directions.
HEAD BIAS
To Next Page
Loading...
Need help?
General
