Datapath Fx4 User Manual

12.3 Disclaimer/Copyright Statement
© Datapath Ltd, England 2016
Datapath Limited claims copyright on this User Guide. No part of this User Guide may be reproduced, released, disclosed,
stored in any electronic format, or used in whole or in part for any purpose other than stated herein without the express
permission of Datapath Limited.
Whilst every eort is made to ensure that the information contained in this User Guide is correct, Datapath Limited make no
representations or warranties with respect to the contents thereof, and do not accept liability for any errors or omissions.
Datapath reserves the right to change specication without prior notice and cannot assume responsibility for the use made of
the information supplied. Datapath Limited acknowledges all registered trademarks used within this User Guide.
Warranty/RMA
24
Warranty/RMA

Datapath Fx4 Specifications

General

Inputs	1 x DisplayPort 1.2, 2 x HDMI 1.4
Maximum Input Resolution	4096x2160 @60Hz
Bezel Correction	Yes
HDCP	Yes
Genlock	Yes
Scalers	Yes, per output
Supported Platforms	Windows, Linux
Resolution Support	Up to 4K
Maximum Output Resolution	4096x2160 @ 60Hz
Rotation	Yes
Audio	Audio pass-through via DisplayPort and HDMI
Control	Ethernet
Power Supply	100-240V AC, 50-60Hz
Video Processing	Real-time