EasyManuals Logo

Datapath Fx4 User Manual

Datapath Fx4
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Safety
5
Chapter 2 - Safety
2.1 Safety Precautions
To prevent damage to your Datapath product or injury to personnel operating the equipment, please read the following safety
precautions prior to operation. These instructions should be made available to all those who will use and operate Datapath
products.
2.1.1 Power Supply
All Datapath products require a mains power supply. This power supply must be disconnected when equipment is being
relocated.
2.1.2 Cables
Do not expose cables to any liquids; doing so may cause a short circuit which could damage the equipment. Do not place heavy
objects on top of any cables as this can cause damage and possibly lead to exposed live wires.
2.1.3 Ventilation
The Fx4 should be located in a well ventilated area. All ventilation holes on the casing must be kept clear of any obstruction at
all times. Failure to do so will result in the system over heating and damaging your equipment.
2.1.4 Working Environment
The equipment should be located in an environment free from dust, moisture and extreme changes in temperature and should
be placed on a stable and solid work surface. Liquids (hot/cold drinks etc) should not be placed near the equipment as spillage
could cause serious damage.
2.1.5 Gas/Flammable Liquids
Electronic equipment should never be used in the presence of gas or any ammable liquid, doing so could result in an explosion
or serious re.
2.1.6 Smoke/Unusual Smells
Should you notice smoke or unusual smells being emitted from your system, turn o and unplug the system from the mains
supply. The system should then be passed to a qualied technician for inspection. Continued operation could result in personal
injury and damage to property.
2.1.7 Maintenance
Apart from what is detailed in this user guide, maintenance should only be carried out by competent technicians, Fx4’s that are
physically damaged should be returned to Datapath for repair using Datapath RMA procedures.
2.2 Unpacking and Initial Inspection
2.2.1 Unpacking
All packaging materials should be retained for future transit.

Other manuals for Datapath Fx4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datapath Fx4 and is the answer not in the manual?

Datapath Fx4 Specifications

General IconGeneral
Inputs1 x DisplayPort 1.2, 2 x HDMI 1.4
Maximum Input Resolution4096x2160 @60Hz
Bezel CorrectionYes
HDCPYes
GenlockYes
ScalersYes, per output
Supported PlatformsWindows, Linux
Resolution SupportUp to 4K
Maximum Output Resolution4096x2160 @ 60Hz
RotationYes
AudioAudio pass-through via DisplayPort and HDMI
ControlEthernet
Power Supply100-240V AC, 50-60Hz
Video ProcessingReal-time

Related product manuals