Safety
6
2.2.2 Initial Inspection
All Datapath products are carefully prepared for shipment and every eort is made to ensure you receive the product in pristine
condition. On receipt, you should carefully inspect the outer packaging for any transit damage i.e. any signs that the item may
have been dropped etc.
Use the product leaet enclosed to establish that all the items are present. Should any items be missing, contact Datapath for
further instructions.
Check the Fx4 for damage that could have an adverse aect on the operation of the system or could cause injury to the
operator. Should there be any physical damage to the power sockets or exposed wiring do not connect to a power source, con-
tact Datapath for further instructions.
2.3 Unpacking
Your packing box should contain the following items:
• The Fx4 Multi Display Controller
• 1 x Mains power cable
• USB 2.0 cable Type A to Type B
• Quick Start Guide
• HDMI Locks: x 2 with the DisplayPort model
x 6 with the HDMI model
• 2 x Rack mount attachments
• 6 x Rack mount screws
• Datapath CD containing Wall Designer Software Application and the Fx4 User Guide.
If any of the items are missing, please contact Datapath for further instructions.
Safety
To Next Page
Loading...
Need help?
General
