DataTale RS-M4T - All Disks: Inserted; Detected; All Disks: NOT Inserted; Detected; All Disks: Disk 4 Data Access ONLY; All Disks: Disk 4 Error ONLY

51 pages

Save Page as PDF

To Next Page

To Previous Page

All Disks: Inserted / Detected

All Disks: NOT Inserted / Detected

All Disks: Disk 4 Data Access ONLY

All Disks: Disk 4 Error ONLY

All Disks: Disk 4 Rebuild ONLY

Fan: Error

Main Page

Default Chapter2
- Table of Contents2
General Information4
- Copyright4
- Notices and Classifications4
- Contact Us4
Precautions for the Raid System5
- General Precautions5
- Raid System Precautions5
Introduction6
- Features6
- System Requirement7
  - Mac7
- Optional Accessories7
- Package Contents8
System Views9
- Front View9
- Rear View9
- Top & Cover View (Exposed)10
Inserting/Replacing the Hard Drives in the Raid System11
- Fasten the HDD Smartguider Kit Onto the Hard Drive12
- Place the HDD Smartguider Kit Inside the RAID System15
Connecting the Raid System to a Host Computer17
Number of Hard Drive/Ssd Supporting each Raid Mode19
Disk Slot Number19
Led Indicators20
- Green: on / off20
- Red: on / Blink / Flash20
- White: on / Flash20
- All Disks: Inserted / Detected21
- All Disks: NOT Inserted / Detected21
- All Disks: Disk 4 Data Access ONLY21
- All Disks: Disk 4 Error ONLY21
- All Disks: Disk 4 Rebuild ONLY21
- Fan: Error21
Daisy Chain: Connecting Multiple Devices22
Safe Removal of the Raid System22
Ssd Smartguider Kit23
- Ssd Smartguider Kit: Package23
- Ssd Smartguider Kit: Ssd Compatibility23
- Ssd Smartguider Kit: Installation24
Raid Master26
Raid Master: Installation26
- Installation for Mac26
Raid Master: Gui30
- Information30
- Configurations30
- Settings30
- Notifications30
- Logs30
- Firmware30
Raid Master: Features31
- Information31
- Raid Configurations33
- Settings33
- Notifications34
- Event Log34
- Firmware Information35
Raid Master: Operation36
- Raid Configurations: Set up a New Raid Set36
- Raid Configurations: Delete an Existing Raid Set39
- Raid Configurations: Rebuild a Raid Set41
Glossory44
Led Indicators44
- Power Led X 144
- RAID ALERT LED X 144
- DISK LED X 844
Raid Master45
- Popup Windows45
- Rebuild47
Raid Modes47
- RAID 0 (Striping)48
- RAID 1 (Mirroring)48
- Raid 1+049
- Jbod (None Raid)49
- Hyperduo: Capacity and Safe50
Appendix: Specifications51

DataTale RS-M4T - All Disks: Inserted; Detected; All Disks: NOT Inserted; Detected; All Disks: Disk 4 Data Access ONLY; All Disks: Disk 4 Error ONLY

Table of Contents