47
7.2 How to turn off the AI Auto-Tracking Function
Please follow the following steps for turning off PTC-285’s AI Auto-Tracking
function.
1. Please use PTC-285’s remote controller to turn off the AI Auto-Tracking
function. Please long-press the “Preset 2” button of the remote
controller for 2 seconds.
2. At this time, PTC-285’s AI Auto-Tracking function will be turned off. There is
a reminder “Out of Track” that will be shown on the OSD of the external
monitor which is connected to the PTC-285. This means that the AI Auto-
Tracking function is turned off successfully.
To Next Page