Datecs DPP-350 - Dip Switch Settings; DIP Switch Functions

. . . . . .
. . . . . . . . . . . . . . . .
Page 15
DPP-350 User Manual
Dip Switch Settings
The DPP-350 is designed to use different methods of
communications. Care must be taken to ensure that the DIP
Switches are not changed from its default factory configuration
unless required.
 DIP SWITCH SETTINGS:
The printer has two absolutely different operation modes.
They are determined by the state of switch Sw2:
 OFF ESC/POS mode
 ON Hex Dump mode
Switch
OFF ON
Sw1
Wide paper roll
(78 mm)
Thinner paper roll
(58 mm)
Sw2 ESC/POS mode Hex Dump mode
Sw3 Hardware protocol Xon/Xoff protocol
Sw4 Normal operation mode Protocol mode
Table 6