MIFARE Reader (MF Version)
The DPP-350 has a built-in MIFARE reader (optional). The MIFARE
reader is designed to read information stored embedded on MIFARE
contactless cards or tags and process the information using device
side software.
Figure 15
Place the MIFARE card close to the printer facing the front of the
printer as shown in the figure above.
User Notes:
To use the MIFARE reader feature, special software must be used
to read and process the card information. Please consult your
reseller if this software is available or contact DATECS for
recommendations on compatible third party software solutions.
To Next Page
Loading...
