Datum TYMSERVE 2000 User Manual

TABLE OF CONTENTS
ts2TFPStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable reflects the current status information
on the TS2000 Time and Frequency Processor. This info
is only available on the IRIG and GPS versions. The
string will indicate either Tracking or Flywheeling.
This is a direct reflection of bit 0 of the TS2000
status bit 0. Bits 1 & 2 are not relevant for network
users.
Status Register Definitions
=====================================================
bit 0 1 = flywheeling(not locked)
0 = locked(to selected reference)
bit 1 1 = time offset > X microseconds
0 = time offset < X microseconds
(X = 5 for IRIG | X = 2 for GPS)
bit 2 1 = frequency offset > 5E8
0 = frequency offset < 5E8
==================================================="
::= {ts2Vars 2}
ts2GPSPosition OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable returns a position fix. It is
only valid on the TS2000-GPS. The returned
string will contain the latitude & longitude
expressed in degrees & minutes and the
altitude in meters. If this variable is
queried on the TS2000-IRIG or TS2000-ACTS the
returned value will be N/A."
::= {ts2Vars 3}
ts2GPSVelocity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable returns a velocity fix. It is
only valid on the TS2000-GPS. The returned
string will contain the East-North-Up velocity
expressed in meters/second. If this variable
is queried on the TS2000-IRIG or TS2000-ACTS
TYMSERVE 2000 Manual Datum Inc, Bancomm Div.
xliv

Datum TYMSERVE 2000 Specifications

General

Brand	Datum
Model	TYMSERVE 2000
Category	Server
Language	English