17
12.2 AUTOMATED TIMERS
The ChloroMatic Nipper has two separate timers available for automated operation. This is ideal if looking to run
the pool a few hours in the morning, then a few hours in the afternoon. It is important to ensure that the timers do
not overlap as this may create confusion when the timer turns on and off.
To adjust ON-TIME of TIMER 1:
70% – 09:35 AM
CHLORINE OUTPUT
Figure 12.3
> From the HOME screen, press menu/setting select;
> The display will show this screen:
MODE
1. TIMER 1
Figure 12.4
> From this screen, press menu/setting select to enter TIMER 1 menu;
TIMER 1
ON 06:00 AM
Figure 12.5
> The screen shows the ON-TIME of TIMER 1:
■ current ON-TIME of TIMER 1 is 6:00am.
> Initially the clock hours will be flashing;
> The clock hours can be changed by pressing the
menu up/down buttons to scroll to your chosen time;
> Press
menu/setting select once your preferred clock hour is displayed;
To Next Page
Loading...
Need help?
General
