18
> If a mistake is made, the setting can be changed later;
> Next, the clock minutes will be flashing;
> The clock minutes can be changed by pressing the
menu up/down buttons to scroll to your
chosed time;
> Press
menu/setting select once your preferred clock minutes is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock AM/PM will be flashing;
> The clock AM/PM can be changed by pressing the
menu up/down buttons to toggle
between AM and PM;
> Press
menu/setting select once your preferred clock AM/PM is displayed;
> If a mistake is made, the setting can be changed later;
> Press
menu/setting cancel (go back) button once your preferred ON-TIME for TIMER 1 is displayed.
This will take you back to the HOME SCREEN.
To adjust OFF-TIME of TIMER 1:
70% – 09:35 AM
CHLORINE OUTPUT
Figure 12.6
> From the HOME screen, press menu/setting select;
> The display will show this screen:
MODE
1. TIMER 1
Figure 12.7
> From this screen, press menu/setting select to enter TIMER 1 menu;
To Next Page
Loading...
Need help?
General
