30
SETTINGS
1. CLOCK
Figure 12.36
> Press menu/setting select;
> The display will show this screen.
1. CLOCK
1 1:21 AM
Figure 12.37
> This screen shows the clock’s current time (ie 11:21AM shown);
> Initially the clock hours will be flashing;
> The clock hours can be changed by pressing the
menu up/down buttons to scroll to your chosen time;
> Press
menu/setting select once your preferred clock hour is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock minutes will be flashing;
> The clock minutes can be changed by pressing the
menu up/down buttons to scroll to your
chosed time;
> Press
menu/setting select once your preferred clock minutes is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock AM/PM will be flashing;
> The clock AM/PM can be changed by pressing the
menu up/down buttons to toggle
between AM and PM;
> Press
menu/setting select once your preferred clock AM/PM is displayed;
> If a mistake is made, the setting can be changed later;
> If the ChloroMatic Nipper is left untouched for ~ 30 seconds, or the
menu/setting cancel (go back)
button is pushed, the display reverts to the HOME screen.
To Next Page
Loading...
Need help?
General
