PROCEDURES
Cold start
In order to bring the life into the aircraft from cold and dark one must start the engine:
1. First, feed consumers with the energy by pressing R.Shift + L (BATTERY–STARTER switch
to BATTERY position).
2. Press R.Shift + Home to start the engine. Monitor the rise in RPM on the corresponding
gauge until it stacks at the idle values of 34-38%.
3. Close the canopy L.Ctrl + C .
Taxiing
To roll out:
1. Gently increase the engine RPM to 65% by moving the throttle forward Numpad+. Once
pulled out, move throttle back Numpad- to idle and roll by keeping the momentum.
The BATTERY-STARTER
switch
Throttle grip
To Next Page
Loading...
