EasyManua.ls Logo

DCS F-86F Flaming Cliffs - Aerial Gunnery; Air-To-Air

DCS F-86F Flaming Cliffs
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCS
[FLAMING CLIFFS]
22
WEAPON DEPLOYMENT
Aerial gunnery
Air-to-air
To aim and engage the air targets:
1. Press 6 to switch to the air-to-air mode.
2. Switch GUNS-MISSILE selector to GUNS position by pressing С . This will move the
sight’s mechanical caging lever to UNCAGED position and unlock the floating reticle (a
diamond ring).
3. Maneuver the aircraft to place the reticle over the target.
4. With the reticle tracking over the target for at least one second, press Space to fire the
guns.
The ranging radar may suffer from ground interference when operating at low altitudes (below 6,000
ft).
Sight uncaged
(reticle floating).
Ready to fire!
Target range
Sight is
mechanically
uncaged

Related product manuals