28
9.2 Learning
1. Scrolldowntheparameterswith
and
keysuntilyouvisualiseP005;
2. Confirmbypressingonthe
key;
3. When the symbol “
” appears, press
on any key of the transmitter you want to
memorize;
4. The display visualizes the number of the
transmitterjustmemorizedandthen“
”;
5. Memorizeallnecessarytransmittersrepeat-
ingthisprocedurefromstep3;
6. Wait10secondsbeforequittingthememo-
rizationmode,displayshowsnow“----“.
Warning: In the case of rolling code remotes,
the receiver can be put into learning mode
by pressing the hidden button on a remote
control previously learned.
8Adjustment of operating parameters
Ifyouneedtomodifytheoperatingparameters(force,speedness
etc..):
1. Scrolldowntheparametersuntilyouvisualizethedesirepa-
rameter(i.g.P032);
2. Confirmbypressingonthe
key;
3. Bypressingon and ,setupthedesiredvalue;
4. Confirmbypressingonthe key(displayshowstheparam-
eterspreviouslyselected).
For the complete list of the “Operating Parameters” See
the table on page. 34.
9Programming complete
WARNINGAttheendoftheprogrammingprocedure,usethebuttons and untiltheappearanceofthesymbol“----”,the
operatorisnowreadyagainfornewmanoeuvres.
To perform any “Advanced Programming” operations (cancellation of the remotes, configuration inputs, etc. ..),
see on page 29.
To Next Page
Loading...
Need help?
General
