ROM-Based Setup
SCSI
Hard
Drive
This configuration setting enables or disables the
SCSI
BIOS. Enable the
SCSI
BIOS
if
a
SCSI
hard disk drive is installed.
User Definable Drivers
This configuration setting allows the user to define
IDE
hard
disk parameters.
There are two options:
48
and
49,
and 2
and
3.
Select
48
and
49,
unless there
is
a conflict with
your
network.
If
you select 2 and
3,
make
sure
to enable
shadow. After selecting a type, return to setup screen 1
and
enter the Disk
Subsystem options.
LAN Boot
This configuration setting enables or disables the
LAN
boot
process. There
are
two
options: enabled and disabled.
NOTE
Uniess your system
is
equipped with a floppy disk
drive or a
hard
disk drive
(IDE
or
SCSI),
you will
need to enable this option.
LAN Timeout
This configuration setting specifies
LAN
timeout values in seconds. There are
two options:
150
and
30.
Choose the
150
second timeout
value
if more than
eight systems are
on
the
network. Otherwise, choose the 30 second timeout
value.
C-8
DECpc
433
Workstation Service
Guide
•
•
To Next Page
Loading...
Need help?
General
