Decathlon LD 920E - Product Description; Electrically-Assisted Bike Technical Features; General Operation of Electrical Assistance

6
PRODUCT DESCRIPTION
Electrically-assi󰄋ed bike technical features
A
Battery
B
CENTRAL MOTOR
C
REMOTE AND DISPLAY
General operation of the electrical assi󰄋ance
The power assi󰘵ed bike can be used with or without assi󰘵ance by pressing the buttons up/down on the remote «C» and altering the modes ECO-TOUR-TURBO-OFF. The selectable ECO-TOUR-TURBO-
OFF assi󰘵ance modes selectable on the remote button «C» allow you to choose a power assi󰘵 level in addition to the e󰘯ort provided. Power assi󰘵ance will only work if you are pedalling, with a selected mode
other than OFF. Assi󰘵ance cuts o󰘯 when the speed is above 25km/h. In case of intensive use and in exceptional climatic conditions, assi󰘵ance may be cut o󰘯 to safeguard the whole sy󰘵em.
The power supplied is calculated by the controller based on your pedalling and the assi󰘵ance mode selected.
The central motor «B» will provide more or less power depending on the mode selected and the force applied.
Power assi󰘵ance does not kick in or shuts down in the following situations:
- The speed is above 25km/h
- You’re not pedalling
- The battery «A» remaining charge is not su󰘲cient
- «OFF» is the power assi󰘵ance mode selected
- When the display is switched o󰘯
A
B
C