Interior Cleaning
For Ice Storage Bin
The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the
first time and reused after stopping for an extended period. It is usually convenient to sanitize the bin
after the ice making system has been cleaned and the storage bin is empty.
1.
Disconnect power from the unit.
2.
Open the door and with a clean cloth, wipe down the interior with a sanitizing solution made of
28g of household bleach or chlorine and 7.5L of hot water (95℉ to 115℉).
3.
Rinse thoroughly with clear water. The wastewater will be drained out through the drainpipe.
4.
Reconnect power to the unit.
The ice scoop should be washed regularly. Wash it just like any other food container.
Ice Making Parts Cleaning
Periodically clean the main system of your icemaker.
1、Repeat above step to clean the water tank and
other inner parts of the unit.
2、If there is no water flowing out from the water
dividing pipe, or the water flowing is very low,
please discharge this water dividing pipe to
clean carefully. Clean each little hole on the
water dividing pipe displayed in the illustration
to the right. Make sure each hole is not clogged
by something, then install back to the original
location.
3、When there are ice cubes on the surface of the
evaporator, but can’t fall down easily, do not use a mechanical object to remove it by force; Only
press the “ON/OFF” button for more than 5 seconds. The unit will enter the ice melting process.
After some time, the big ice-cubes will fall down. Then, turn off the unit and unplug the power cord
to clean the surface of the evaporator.