ERROR INDICATOR
a) Ambient temp sensor breakdown Display E1 in digital window.
b) The machine is not making ice or display window is reading as “E2.”
c) Magnetic control switch cutoff----“Full” light will be on when plugging on or just
turning on the unit. It will delete the breakdown display if this switch is electrically shorted.
d) During the ice making process, press the “ON/OFF” button for more than 5 seconds.
The unit will start to enter the ice harvesting program. After this program is complete, the
unit will continue to enter the ice making process again.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmentally safe recycling.
To Next Page
Loading...
