Dedicated Micros Digital Sprite 2 - Logfile Backup

Dedicated Micros Page 99
The following is typical log information:
#
System-Start : at 15:11:39 on 24-06-2004 UTC
System-Halt : at 15:11:28 on 24-06-2004 UTC
Restart code : 100
Restart reason : Controlled user RESET from Telnet or the webpages
Alarm-Log : Alarm initiated : Zone 1 at 15:11:59 on 24-06-2004 +0100
Connection-Status: request connection for Alarm Reporting at 15:11:59 on 24-06-2004 +0100
Connection-Status : Connection to 172.16.100.12\Ethernet at 15:11:59 on 24-06-2004 +0100
Site-Id: DS250
Arc-ID: DS2-50
System-Status:
Local-IP: 172.16.89.50
Activating-Channel: 3
Response-Images: 1
Response-Area: Zone 1
Response-Level: GREEN
Alarm-Time: 15:11:59 on 24-06-2004
Rec-Index: 14:11:59 on 24-06-2004
Connection-Status : Connection closed at 15:11:59 on 24-06-2004 +0100
#
Logfile Backup
This file is updated every time the Logfile reaches its maximum capacity. The
Logfile will automatically write over the top of the existing Logfile Backup to
create a file containing information that occurred recently.
Along with the Logfile this ensures the current information and most recent
information is available for analysis.
The following is a typical example of the information held within the Logfile Backup.
System-Start : at 15:47:41 on 04-06-2004 UTC
System-Halt : at 15:47:30 on 04-06-2004 UTC
Restart code : 100
Restart reason : Controlled user RESET from Telnet or the webpages
System-Status : Standard UNSET recording selected by timer at 15:47:42 on 04-06-2004 +0100
System-Status : Standard UNSET recording selected by timer at 15:47:42 on 04-06-2004 +0100
System-Status : Standard UNSET recording selected by timer at 15:47:42 on 04-06-2004 +0100
System-Status : Standard UNSET recording selected by timer at 15:47:42 on 04-06-2004 +0100
System-Status : Standard UNSET recording selected by timer at 15:47:43 on 04-06-2004 +0100
System-Status : Standard UNSET recording selected by timer at 15:47:43 on 04-06-2004 +0100