Dedicated Micros Digital Sprite 2 - Appendix C - Port Assignment on the Digital Sprite 2; Port Allocation

Dedicated Micros Page 115
Port Allocation
It is possible to identify specific ports that will be used for functionality supported on the Digital
Sprite 2.
These functions are:
FTP
Telnet
HTTP
Telemetry Control
Audio
Debug
Some of these ports have default settings that will link to the default settings of a standard
network infrastructure, e.g. port 21 default port for FTP, port 80 default port for HTTP.
However if these default port numbers have already been allocated to other devices on the
network then it is possible to identify alternative port numbers.
To view the ports that have been enabled and configured on the Digital Sprite 2, select Network
-> Firewall Options. This details the port numbers, type of connection, application and use.
Appendix C – Port Assignment on the Digital Sprite 2
Important Note: It’s important to ensure all devices that are part of the system
configuration are all allocated the same port number otherwise communication
between the devices will not be successful.