Dedicated Micros ©2009
106
EcoSense
Using the optional Keyboards (DM/
KBC1 & DM/KBC2)
The unit can also be controlled using an optional Dedicated Micros keyboard. This is connected via
the KBD connector on the rear of the unit and provides the same control functions as the I.R Remote
Control. The following keyboards are supported:
Note: The 4 channel unit does not support the optional Keyboard.
DM/KBC1 Keyboard
DM/KBC2 Keyboard
Note: Not all buttons detailed below are relevant for both models of keyboard.
To Next Page
Loading...
