1 INTRODUCTION
This document details the installation and operation requirements of the DSE6110 MKIII & DSE6120
MKIII module and is part of the DSEGenset® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the
product is passed or supplied to another party, ensure that this document is passed to them for
reference purposes.
This is not a controlled document. DSE do not automatically inform on updates. Any future updates of
this document are included on the DSE website at www.deepseaplc.com
The DSE6110 MKIII & DSE6120 MKIII series is designed to provide differing levels of functionality
across a common platform. This allows the generator OEM greater flexibility in the choice of controller
to use for a specific application.
The DSE6110 MKIII series module has been designed to allow the operator to start and stop the
generator, and if required, transfer the load to the generator either manually or automatically.
Additionally, the DSE6120 MKIII automatically starts and stops the generator set depending upon the
status of the mains (utility) supply.
The user also has the facility to view the system operating parameters via the text LCD display.
The DSE6110 MKIII & DSE6120 MKIII module monitors the engine, indicating the operational status
and fault conditions, automatically shutting down the engine and giving a true first up fault condition of
an engine failure by the text LCD display.
The powerful ARM microprocessor contained within the module allows for incorporation of a range of
complex features:
• Text based LCD display
• True RMS Voltage
• Current and Power monitoring
• USB Communications
• Engine parameter monitoring.
• Fully configurable inputs for use as alarms or a range of different functions.
• Engine ECU interface to electronic engines including Tier 5 engines.
• Integral PLC to help provide customisation where required
• Fuel tank level monitoring to track fuel filling operations and detect fuel leak/theft
• Data Logging
The DSE Configuration Suite PC Software allows alteration of selected operational sequences,
timers, alarms and operational sequences. Additionally, the module’s integral front panel configuration
editor allows adjustment of this information.
Access to critical operational sequences and timers for use by qualified engineers, can be protected
by a security code. Module access can also be protected by PIN code. Selected parameters can be
changed from the module’s front panel.
The module is housed in a robust plastic case suitable for panel mounting. Connections to the module
are via locking plug and sockets.
To Next Page
Loading...
Need help?
General
