Defender Guard Pro User Manual

GUARD PRO
QUICK START GUIDE
ATTENTION
For Returns or Support you MUST contact
DefenderCameras.com/Support

Defender Guard Pro Specifications

General

Weather Resistance	IP65
Connectivity	Wi-Fi
Storage	MicroSD card (up to 128GB), Cloud storage
Audio	Two-way audio
Power Source	Battery powered (rechargeable)

Summary

Let's Get Started

Download and Set Up the App

Guide to downloading the Defender Guard app and creating an account for verification.

Power On Your Camera

Instructions on plugging in the camera and waiting for the LED indicator to flash green.

Setting Up Your Camera

Connect to Wi-Fi and Pair Your Camera

Steps for connecting the camera to Wi-Fi and pairing it with the mobile app.

Select Wi-Fi Network and Enter Password

Selects the 2.4 GHz Wi-Fi network and enters the password for connection.

Device Cloud Connection and Setup Completion

Waits for device connection to the cloud and completes setup by naming the device.

Step 2: Position and Install Your Camera

Test Wi-Fi Strength and Video Feed

Uses the app to test Wi-Fi strength and video feed before mounting the camera.

Setting Up Notifications

Configure Notification Settings

Instructions on enabling alarm, message push, and device offline notifications in the app.

Setting Up Motion Detection

Motion and Human Detection Settings

Explains how to enable motion and human detection and their notification preferences.

Set Detection Sensitivity

Guide to adjusting motion detection sensitivity levels for accurate alerts.

Detection Region Setting

Define Motion Detection Areas

Recording Setup

Continuous Recording Setup

Setting Up Night Vision

Night Vision Modes Explained

How to Share Device Access

Add Shared Users

Set User Permissions